When it comes to making your SCX24 Brushless, there is only one name. This post will compare the two systems for the Axial SCX24 Brushless Motor Upgrade.
This site contains affiliate links. When you click links, Especially with the word (Ad) you Help the site Grow. The site may receive a commission, at no additional cost to you!
(Click Here) for Replacement Motors using the stock ESC for SCX24.
Also on this Site… (Top 5) Axial SCX24 Upgrades
#1 Furitek SCX24 Stinger Brushless Power System
The main reason I have the Stinger system at #1 is the motor fit a bit lower in the truck and is smaller in diameter. For this, you are able the get the weight lower and have more room to place equipment.
FURITEK Stinger Brushless Power System… Amazon — eBay
Both motors are outrunners – which make a ton of low end crawler power but don’t do well in dust/dirt/mud for the motor is more exposed to the elements.
Spec
- (Motor) spec
- KV (RPM/Motor) – 3450
- No-load current @10V – 0.7A
- Watt – 120W
- Battery – 2-3S
- Resistance – 0.16 Ohms
- Max Current – 10A
- Slot/Pole – 12
- Motor size (mm) – 15.5×20.6
- Shaft (mm) – 1.5×6
- Weight (g) – 17.5
Note
More on spec and spec source at furitek.com – FURITEK STINGER BRUSHLESS POWER SYSTEM FOR SCX24
Installation and Dive Video below
#2 Furitek SCX24 Liko Pro Plus Brushless Combo
FURITEK LIKO PRO Plus BRUSHLESS Combo… Amazon — eBay
Spec
- These specs are for both systems
- (ESC) Spec
- Support 2S-3S lipo battery
- BIG BEC: 5V or 6.5V 2.5A (Don’t need external BEC if using big Servo)
- Constant current: 30A
- Burst current: 50A
- Build-in Switch power
- Dimension (mm): 28(L)x 15.5(W)
- Weight: 3.7 grams
Note
More on spec and spec source at furitek.com – FURITEK LIKO PRO PLUS BRUSHLESS COMBO FOR SCX24
A good video for ideas on how to install the system
Pingback: (Top 5) Axial SCX24 Upgrades | RC Guided
Pingback: (Top 5) Replacement Motors For Axial SCX24 - RC Guided