Are you looking to upgrade or replace your Rival MT10 motor? With the help of this post, you can rest assured that your Rival MT10 will be running smoothly and efficiently in no time.

This site contains affiliate links. When you click links, Especially with the word (Ad) you Help the site Grow. The site may receive a commission, at no additional cost to you!

Top Picks	Features	Deals
#1 Hobbywing EZRun MAX10 G2 80 Amp / 3652SD Motor Combo	A Grate Replacement – nearly the same spec as the stock motor – just better in nearly every category ESC – Tons of features over stock – Adjustable timing for more speed – Fan only cuts on when needed (to save power) – Large capacitor to give more bottom-end power – also helps the battery draw less current (the battery should run cooler and last longer) – Real-time data with Bluetooth module (throttle amount, voltage, current, temperature, speed, and more) – Waterproof!!! – Will Need HOBBYWING ESC Program Card (to get the max out of ESC) – 2-3S Lipo – 80A/520A – Cont./Peak Current Motor – Just smoother and more reliable motor over stock – Recommend Motor (3300kV) it has more torque for the bigger tires and can run on 3s lipo	HOBBYWING EZRUN 3652 SD G3 Motor On Amazon EzRun Max10 G2 80A ESC On Amazon Combo Deal On eBay Don’t Forget HOBBYWING ESC Program Card On Amazon On eBay
#2 Hobbywing EZRun MAX10 G2 140 Amp / 3665SD Motor Combo	Top Upgrade Over Stock ESC – Nearly the same ESC as #1 just ever beefed up to handle more power – 2-4S LiPo – 140A/880A – Cont./Peak Current Recommend Motor (2400kV) – Everything will run cooler and last longer on 2/3s lipo – The ability to show off speed on 4s LiPo Recommend Motor on 2s (4000kV) – The 2400kV motor might be kinda slow on 2s – The 4000Kv will get you the speed you need on 2s (it can run on 3s as well to get more speed) Note: both motors have more power than stock which will increase the chances of braking parts.

More Team Associated Rival MT10 posts (Here)

#1 Hobbywing EZRun MAX10 G2 80 Amp / 3652SD Motor Combo

This is essentially a direct replacement for the Associated MT10 but with a bunch more features.

The recommendation: is to get the 3300kV motor!!! – it has more bottom-end power to turn the bigger wheels and you can run 3s if you want more speed. The 4100kV and the 5400kV will have more RPM but might run a bit hot, you’ll need better batteries for longer run time and to handle the amp rate. The 5400kV can only handle 2s.

Where to buy:

on Amazon – EzRun Max10 G2 80A ESC – Hobbywing EZRun 3652 Motor

on eBay – All combos(both ESC and Motor)

Sensored interface (much better control in low RPM over stock)
32 degrees timing (giving nearly 25% more RPM vs 0 degrees)
The fan that only cuts on when needed (saves power and cools the system)
capacitor capacitance is 74% more (should give more power down low and less overloading the ESC)
This + Combine with other integrated technology its temps are nearly 25c lower (should last much longer)
Mobile app + Bluetooth = real-time data on how your ESC and Motor is running
And all system on this list is Waterproof!

#2 Hobbywing EZRun MAX10 G2 140 Amp / 3665SD Motor Combo

This is a full-out upgrade over stock. The motor has a bigger can which makes more torque and the ability to run on 4s – this will make your ride stupid fast.

The recommendation: unlike on top, this motor is a bit overkill, and should handle the weight, big wheels with any combo you get. The 4000kV will be the fastest on 2-3s lipo but you will have lower run times. The 3200kV is in the middle of the road with 2-3s lipo. (If I was to buy this combo for a monster truck – I would get 2400kV!!! mainly because you will get longer runtimes on 2-3s (still with good speed and power) and if you want to show off you have the ability to run 4s!!!)

Where to buy:

On Amazon – EZRUN MAX10 G2 140A – 3665 SD G3 Motor

On eBay – All Combo (Both ESC and Motor)

Basically, the same features as the #1 system
Bigger motor and ESC that can handle 4s
Note: this has a bigger 5mm motor shaft – you will need to buy a 5mm pion gear (this makes the car more durable – if it had the stock size shaft it would be more likely to snap)

#3 Spektrum RC Firma 85 Amp / 3300Kv Kv Motor

A budget-friendly ver. of #1 on the list but you lose some key features.

The recommendation: only get the 3300Kv – any higher Kv setup with this might put too much stress on the ESC in a monster truck.

Where to buy:

On Amazon – for the ESC and Motor Combo

On eBay – for the ESC and Motor Combo

The main one – It’s a sensorless system (you lose low RPM control)
Should be easier to set up and cost less than #1 on the list. features:

Honorable Mention – Hobbywing QuicRun Fusion SE 2-in-1 System

I would only buy this if you’re on a budget or you want to slow down your car. It is by far the best value system on the market today but it is more intended to trail trucks and rock crawlers.

The recommendation: The 1200Kv system you can usually get at a lower price and the one I would go with on a pure budget but you probably want more speed the 1800Kv would be the better pick if you had the money.

Where to Buy: for 1200Kv and for 1800kv

On Amazon – 1800kv (both ESC and Motor) and 1200Kv

On eBay – for both

The ESC and Motor is hard to beat for the price
The cheapest way to get your Rival MT10 bat on the road, still be Waterproof and run 3s max.

Check out these sites for more on the topic…

rctalk.com – Rival mt10 4s upgrade
RCunexttuesday TY- Rival MT10 must have upgrade? (no more body issues!)
RCunexttuesday TY – BULLETPROOF RC car upgrades!? Rival MT10 MUST DO?? (RPM A ARMS)
facebook.com – What’s a good drop in motor and esc combo upgrade for the MT10
RC Circus TY – RivalMT10 | Upgrade Advice

Importance of Motor Upgrade and Replacement

The Team Associated Rival MT10 without-a-doubt a powerful machine, but even the best machines need maintenance and upgrades from time to time. Over time, the motor of your Rival MT10 can wear out or become outdated, reducing its performance and efficiency. By upgrading or replacing your motor, you can improve the performance, speed, and power of your Rival MT10, making it more reliable and efficient.

Signs That Indicate the Need for a Motor Upgrade

There are several signs that your Rival MT10 may need a motor upgrade or replacement. Some of the most common signs include:

Reduced power or acceleration
reduce run times
Unusual noises or vibrations
Overheating motor or battery

If you notice any of these signs, it may be time to consider upgrading or replacing your motor.

Factors to Consider When Choosing a Motor Upgrade

When choosing a motor upgrade for your Rival MT10, there are several factors to consider. One of the most important factors is the power and/or efficiency of the motor. A higher-power motor can provide better performance and speed, but it can also be more expensive. Other factors to consider include the overall size and weight of the motor and the compatibility with your Rival MT10.

It’s also important to consider your specific needs when choosing a motor upgrade. If you use your Rival MT10 for trail riding (less speed) you may need a less powerful motor like the Hobbywing QuicRun Fusion SE and say a bunch of money. On the other hand, if you’re trying to race or gain speed you might want the Hobbywing EZRun MAX10 G2 140 Amp

Types of Motor Replacements/Upgrades Available for Rival MT10

There are several types of motor replacements and upgrades available for Rival MT10. One of the most popular upgrades is a higher horsepower motor, which can provide better performance and speed. Other upgrades include more battery-efficient motors or lighter-weight motors.

Steps to Replace/Upgrade the Motor of Rival MT10

Replacing or upgrading the motor of your Rival MT10 requires knowing basic mechanics. If you’re not experienced with RC, it’s best to leave the job to the hobby store. However, if you’re comfortable working on your own and have the necessary tools, the Video below will get you on the right step.

Maintenance Tips for Rival MT10 After Motor Upgrade

After upgrading or replacing your Rival MT10 motor, it’s important to follow proper maintenance procedures to ensure the longevity and performance of the motor. Bearing oil like “Trinity Perpetual Motion” or “Liberty Oil” can help improve life but I find if your motor running hot a good heat sink (in this case a 540/550 size) will help way more…

Conclusion

Upgrading or replacing the motor of your Rival MT10 can provide a significant boost in performance and efficiency. By following the steps outlined in this article and consulting with a professional, you can ensure a successful motor upgrade or replacement. Remember to follow proper maintenance procedures to keep your Rival MT10 running smoothly and efficiently for years to come.